*****************************************************************************
*                                                                           *
*             Installation guide for Novell NetWare Server 3.12             *
*                                                                           *
*****************************************************************************


   Location of Driver:     \NETWARE\RP1624W.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v3.12 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.
      1. Insert the Driver Diskette into drive A and check the contents
         of subdirectory  A:\NETWARE , It should contain the following file:

         RP1624W.LAN  Novell NetWare V3.12 Server Driver

      2. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server name: LOAD INSTALL <Enter>

      3. Select "Maintenance/Selective Install" and press <Enter>.

      4. Select  " LAN Driver Options (Configure/Load/...) "  and press
         <Enter>.

      5. Press the <Ins> key to specify other drivers to install.

      6. Press  <F3>  and specify the driver path (A:\NETWARE) and press
         <Enter>.

      7. The RP1624W.LAN driver should appear in your choice list for the
         'Select a  LAN  Driver' field. Choose this  driver to start the
         driver loading and  binding  procedure.  This will allow you to
         load and bind all 4 frame types supported by NetWare.

      8. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.


      Installation Notes:
      -------------------
      1.Installing Multiple LAN Adapters:
         The keyword  "SLOT"  is  provided for multiple LAN adapters in a
         single server by the driver RP1624W.LAN.  So, add EtherID in LOAD
         commands. For example:

         LOAD RP1624W FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1
         BIND IPX TO LAN_A NET=11
         LOAD RP1624W FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2
         BIND IPX TO LAN_B NET=22

      2. The keyword  "MEDIUMTYPE" is provided for specifying adapter's speed
         ( AUTO, 100FULL, 100HALF, 10FULL, 10HALF ) ,  add MEDIUMTYPE in LOAD
         commands. For example:

         LOAD RP1624W FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUMTYPE=100FULL
         BIND IPX TO LAN_A NET=11

----------------------------- End Of File ----------------------------------
