New Items in Atel Electronics

Media converter 2x 10/100TX (RJ-45) + 1x 100FX (MM SC) (ORing IMC-1021FX-MM-SC-T)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
100Base-FX Multimode ports (2KM, 1310nm, SC connector): 1
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX
LED Indicators
Power / Ready indicator: Green Ready LED x 1
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for duplex
Power
Input power: 9�30 VDC voltage power input
Power consumption (typical): 4.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x H x D): 64mm x 102mm x 25mm
Weight: 300g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Media converter 2x 10/100TX (RJ-45) + 1x 100FX (SM SC) (ORing IMC-1021FX-SS-SC-T)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
100Base-FX Singlemode ports (30KM, 1550nm, SC connector): 1
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX
LED Indicators
Power / Ready indicator: Green Ready LED x 1
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for duplex
Power
Input power: 9�30 VDC voltage power input
Power consumption (typical): 4.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x H x D): 64mm x 102mm x 25mm
Weight: 300g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 24x 10/100 RJ-45 + 2 slide-in SFP slots / RJ-45, O-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 24
1000 COMBO with SFP: 2
RS-232 Serial Console Port: DB9 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000BaseTX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Max. Number of Available VLANs: 256
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, ACL, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, O-Ring
LED Indicators
Power indicator: Green for power on
Status indicator: Green for system ready
10/100TX RJ45 port indicator: Green at left for port Link/Act, Green at right for 100Mbps link
1000 RJ-45/SFP port indicator: Green for port Link/Act
Power
Input power: 100~240VAC with power cord (redundant)
Power consumption (typical): 18W on AC power
Overload current protection: present
Physical Characteristic
Dimension (W x D x H): 440mm x 220mm x 44mm
Weight: 2480g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (-14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Warranty
Warranty period: 2 years

Smart PCI switch, 4x 10/100 RJ-45, O-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol)
MAC Table: 2048 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching bandwidth: 1.0 Gbps
VLAN: Port Based
Security Features: Enable/disable ports, VLAN to segregate and secure network traffic
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, O-Ring
LED Indicators
Power / Ready indicator: Green : Ready LED x 1
Fault indicator: Red : Indicate unexpected event occurred
O-Ring indicator: Yellow : Indicate port operated in O-Ring mode on each port
10/100TX RJ45 port indicator: Link (Green On) / Activity (Green Blinking)
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC (Optional)
Power
Input power: 1 DC redundant external power 9�30 VDC
Power consumption (typical): 3.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Dimension: standard profile PCI card, 124mm length
Weight: 100g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Warranty
Warranty period: 3 years

Unmanaged switch, 5x 10/100 RJ-45, DIN 35mm / wall mounting (ORing IES-1050-T)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 5
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control
Processing: Store-and-Forward
LED Indicators
Power / Ready indicator: Green : Ready LED
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex
Power
Input power: 9�30 VDC voltage power input
Power consumption (typical): 3W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 88mm x 102mm x 24mm
Weight: 305g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 6x 10/100 RJ-45 + 2x100 MM SC, µ/O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6
100Base-FX Multimode ports (2km, 1310nm, SC connector): 2
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, μ-Ring, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in μ-Ring Master mode
μ-Ring indicator: Green : Indicate system operated in μ-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 9W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 739g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 6x 10/100 RJ-45 + 2x10/1000 RJ-45, µ/O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6
1000 Base-T Ports in RJ45 Auto MDI/MDIX: 2
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000BaseTX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, μ-Ring, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in μ-Ring Master mode
μ-Ring indicator: Green : Indicate system operated in μ-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
1000TX port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 8W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 726g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 8x 10/100 RJ-45, µ/O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, μ-Ring, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in μ-Ring Master mode
μ-Ring indicator: Green : Indicate system operated in μ-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 714g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 6x 10/100 RJ-45 + 2x1000 SM SC, µ/O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6
1000Base-LX Singlemode ports (10km, 1310nm, SC connector): 2
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, μ-Ring, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in μ-Ring Master mode
μ-Ring indicator: Green : Indicate system operated in μ-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 7W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 744g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 6x 10/100 RJ-45 + 2x1000 MM SC, µ/O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6
1000Base-SX Multimode ports (550m, 850nm, SC connector): 2
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, μ-Ring, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in μ-Ring Master mode
μ-Ring indicator: Green : Indicate system operated in μ-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 7W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 744g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 6x 10/100 RJ-45 + 2x100 SM SC, µ/O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 6
100Base-FX Singlemode ports (30km, 1550nm, SC connector): 2
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, μ-Ring, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in μ-Ring Master mode
μ-Ring indicator: Green : Indicate system operated in μ-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 9W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 739g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

(HS-1115-K) Soldering kit

Working period: up to 120 min.
Capacity: 26ml.
Weight: 124g.
Kit includes:- soldering iron, - soldering tip, - desk stand, - sturdy case

Module, SFP 1x 1000 Mbps LC SM, 40 km, WDM TX:1310nm

Port: 1x 1000 Mbps LC SM
TX wavelength: 1310 nm
RX wavelength: 1550 nm
Max. distance: 40 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Module, SFP 1x 1000 Mbps SC SM, 40 km, WDM TX:1310nm

Port: 1x 1000 Mbps SC SM
TX wavelength: 1310 nm
RX wavelength: 1550 nm
Max. distance: 40 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Module, SFP 1x 1000 Mbps SC SM, 20 km, WDM TX:1310nm

Port: 1x 1000 Mbps SC SM
TX wavelength: 1310 nm
RX wavelength: 1550 nm
Max. distance: 20 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Module, SFP 1x 1000 Mbps LC SM, 40 km, WDM TX:1550nm

Port: 1x 1000 Mbps LC SM
TX wavelength: 1550 nm
RX wavelength: 1310 nm
Max. distance: 40 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Module, SFP 1x 1000 Mbps SC SM, 40 km, WDM TX:1550nm

Port: 1x 1000 Mbps SC SM
TX wavelength: 1550 nm
RX wavelength: 1310 nm
Max. distance: 40 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Module, SFP 1x 1000 Mbps SC LM, 20 km, WDM TX:1550nm

Port: 1x 1000 Mbps SC SM
TX wavelength: 1550 nm
RX wavelength: 1310 nm
Max. distance: 20 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Module, SFP 1x 1000 Mbps SC LM, 10 km, WDM TX:1550nm

Port: 1x 1000 Mbps SC SM
TX wavelength: 1550 nm
RX wavelength: 1310 nm
Max. distance: 10 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Wave Division Multiplexing (WDM): yes
Module type: SFP
Warranty period: 1 year

Wall-mounted box, 19", 9U, metal door, dismantle, 480x550x450 mm (height,width,depth)

Wall-mounted box, 19", 12U, metal door, dismantle, 740x550x450 mm (height,width,depth)

Patch panel, 48-port, STP, cat. 6, 1U, 19", Krone type connectors

Patch panel, 48-port, STP, cat. 6, 1.25U, 19", Krone type connectors

Patch panel, 48-port, UTP, cat. 6, 1.25U, 19", Krone type connectors

Wall-mounted box, 19", 12U, glass door, dismantle, 610x550x450 mm (height,width,depth)

Wall-mounted box, 19", 9U, glass door, dismantle, 480x550x450 mm (height,width,depth)

Managed switch L3, 24x 10/100 RJ-45, 2x 10/1000 Mbps RJ-45, 2 slide-in SFP slots, 19" ...

Standards: IEEE 802.3/u/x/ad, IEEE 802.1D/w/X/Q/s/v
Copper ports: 24x 10/100 Mbps RJ-45, 2x 10/100/1000 Mbps RJ-45
Free slots: 2x 1000 Mbps (SFP)
Auto MDI/MDI-X: yes
Auto-negotiation (Nway): yes
Switching architecture / speed: Store and Forward
Packet flow control: Flow-Control, Back-Pressure
VLAN support: port-based, tag-based / 255, private VLAN, protocol-based VLAN, GVRP
I/O throughput management: Port Trunking, Load Balancing, Bandwidth Control, Jumbo Frames (9KB)
Transmission security / quality: QoS, CoS, DSCP, Spanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, IGMP snooping, IGMP Queried
Security: IEEE 802.1X, RADIUS, TACACS+, ACL (L2/L4), SSH v1.5/v2.0, SSL
L3 features: 4000 IP entries, 256 static routes, ARP, CIDR, RIPv1, RIPv2, OSPF, DVMRP, PIM-DM, VRRP, DHCP relay agent, DHCP Boot, DHCP server, DNS Proxy
Management: WWW, telnet, console, SNMP v1/v2c, RMON, IPv6
Switching capacity [Gbps]: 12.8
Forwarding rate [Mpps]: 9,5
MAC address memory: 16000
Buffer / operating memory [kb]: 262144
Housing / case type: 19", metal
Dimensions: 440x415x44 mm
Operating temperature: 0�C � 50�C
Operating humidity: 5% � 95%, non-condensing
Power: internal, ~230V AC 50Hz, redundant power connector for RPS600WA (#05732)
Certificates:CE, FCC Class A, VCCI Class A, CISPR Class A
Warranty period: limited lifetime
Manufacturer: Edge-corE

Managed switch, 24x slide-in SFP slots, 2x 10/1000 RJ-45, 2 slide-in SFP slots / RJ-45, IP ...

Standards: IEEE 802.3/ad/x IEEE 802.1D/w/p/s/v/X
Copper ports: 2x 10/100/1000 Mbps RJ-45, 2x 1000 Mbps RJ-45 Combo
Free slots: 24x 100 Mbps (SFP) + 2x 1000 Mbps (SFP)Combo
Auto MDI/MDI-X: yes
Auto-negotiation (Nway): yes
Switching architecture / speed: Store and Forward
Packet flow control: Flow-Control, Back-Pressure
VLAN support: port-based, tag-based, private VLAN, protocol-based VLAN, GVRP, Q-in-Q
I/O throughput management: Port Trunking (6 groups), Bandwidth Control, Jumbo Frames (10kB)
Transmission quality: QoS, CoS, DSCP, Spanning Tree, Rapid Spanning Tree, Multiple Spanning Tree, Port Mirroring, IGMP Snooping, IGMP Querier
Security: IEEE 802.1X, ACL (L2/L4), RADIUS, TACACS+, SSH v1.5/v2.0, SSL
Management: WWW, console, telnet, RMON, SNMP v1/v2c/v3
Stacking: IP stacking function
Event logging: syslog, event log, error log
Switching capacity [Gbps]: 12,8
Forwarding rate [Mpps]: 9,5
MAC address memory: 8000
Buffer / operating memory [kb]: 9216
Housing / case type: 19", metal
Net weight: 2 kg
Dimensions: 440x230x44 mm
Operating temperature: 0�C � 45�C
Operating humidity: 10% � 90%, non-condensing
Power: internal, ~230V AC 50Hz
Certificates:CE, FCC Class A, VCCI Class A, CISPR Class A
Warranty period: limited lifetime
Manufacturer: Edge-corE

Fluke 435 - Three-phase power quality analyzer

Locate, predict, prevent and troubleshoot problems in power distribution systems.
Number of inputs: 4
Maximum input voltage: 1000V
Maximum sampling speed: 200kS/s on each channel simultaneously
Voltage measurement: 1�1000Vrms (1400Vpk)
Current measurement: 0�20A (5500Apik)
Frequency measurement: 42,50�57,50 Hz
Harmonic order (n): DC, 1 to 50
THD: 0�100%
Memory: 50
Weight: 1.1 kg
Guarante: 36 months

Wall-mounted box, 19", 6U, metal door, 320x550x450 mm (height,width,depth)

Wallmounted box for cable supply

Wallmounted box for cable supply (600x600mm)

#06618 - additional product is necessary.

Gas tool(torch+solder+blow) kit

Appointed with metal gas container set at rectangular base. Includes piezoelectrical lighter. With different tips can implement functions of soldering iron, burner, warm air supercharger with catalyzer (with tips in set).

(HS-1115-3) Soldering plastic with large gas tank

Working period: up to 120 min.
Capacity: 26 ml.
Weight: 124 g.

FLUKE T5-600 - Electrical tester

Max. LCD display: 1000
Range selection: automatic
AC voltage: 600V
DC voltage: 600V
AC current: 100A
Resistance: 1000Ω
Continuity test: 0 - 400 Ω
Dimensions: 203 x 51 x 30,5 mm
Weight: 380g
Manufacturer: Fluke

Phone test set (Fluke Networks TS-25D)

- Monitor mode enables listening to the sound to determine if the circuit is carrying digital services without disrupting the traffic
- High voltage alarm
- 32 digit last number redial
- Tone and pulse operation
- Polarity indication
- Battery - 9V

Coaxial cable TRISET-11, 100 m

Inner copper diameter: 1.63 mm ± 0.03
Dielectric thickness: 2.74 mm ± 0.05
Dielectric diameter: 7.11 mm ± 0,1
Impedance: 75 Ω
Shield: Al,9+23+9 µm
Braiding: Al,24/7/0.16
Outer coating: 10.2 mm/PE + gel/black
Attenuation: 47 MHz - 2.5 dB/100 m, 88 MHz - 4.1 dB/100 m, 174 MHz - 5.6 dB/100 m, 230 MHz - 6.5 dB/100 m, 470 MHz - 9.3 dB/100 m, 862 MHz - 13.2 dB/100 m, 950 MHz - 13.9 dB/100 m, 2150 MHz - 21.0 dB/100 m, 2400 MHz - 21.6 dB/100 m

Coaxial cable TRISET-11, 200 m

Inner copper diameter: 1.63 mm ± 0.03
Dielectric thickness: 2.74 mm ± 0.05
Dielectric diameter: 7.11 mm ± 0,1
Impedance: 75 Ω
Shield: Al,9+23+9 µm
Braiding: Al,24/7/0.16
Outer coating: 10.2 mm/PE + gel/black
Attenuation: 47 MHz - 2.5 dB/100 m, 88 MHz - 4.1 dB/100 m, 174 MHz - 5.6 dB/100m, 230 MHz - 6.5 dB/100 m, 470 MHz - 9,3 dB/100m, 862 MHz - 13.2 dB/100m, 950 MHz - 13.9 dB/100 m, 2150 MHz - 21.0 dB/100 m, 2400 MHz - 21.6 dB/100m

Device server, 4x RS422/485 (2kV isolated) + 2x 10/100 RJ-45 (LAN + PoE PD), SSL secured (ORing ...

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
PoE PD port: Present at ETH2, Fully compliant with IEEE 802.3af Power Device specification, Over load & short circuit protection, Isolation Voltage 1000 VDC min., Isolation Resistance 100MΩ min.
Serial Ports
Connector: 5 pin terminal block x 4 (2kV isolated)
Operation Mode: RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
Security
Data encryption: SSL
LED Indicators
Power indicator PWR 1(2)(PoE) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 6.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 667g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 4x RS232/422/485 + 2x 10/100 RJ-45 (LAN + PoE PD), SSL secured (ORing IDS-5642+)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
PoE PD port: Present at ETH2, Fully compliant with IEEE 802.3af Power Device specification, Over load & short circuit protection, Isolation Voltage 1000 VDC min., Isolation Resistance 100MΩ min.
Serial Ports
Connector: DB9 x4
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
Security
Data encryption: SSL
LED Indicators
Power indicator PWR 1(2)(PoE) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 682g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 4x RS232/422/485 + 2x 10/100 RJ-45 (LAN), SSL secured (ORing IDS-5642)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
Serial Ports
Connector: DB9 x4
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
Security
Data encryption: SSL
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 678g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 1x RS232/422/485 + 2x 10/100 RJ-45 (LAN), SSL secured (ORing IDS-5612)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
Serial Ports
Connector: DB9 x1
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
Security
Data encryption: SSL
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 3-pin terminal block
Power consumption (typical): 4W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 72mm x 100mm x 31mm
Weight: 327g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 1x RS232/422/485 + 2x 10/100 RJ-45 (LAN) (ORing IDS-5012)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
Serial Ports
Connector: DB9 x1
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 3-pin terminal block
Power consumption (typical): 4W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 72mm x 100mm x 31mm
Weight: 327g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 4x RS232/422/485 + 2x 10/100 RJ-45 (LAN) (ORing IDS-5042)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
Serial Ports
Connector: DB9 x4
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 678g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 1x RS232/422/485 + 1x 100 SM SC (LAN) (ORing IDS-5011FX-SS)

Physical Ports
100Base-FX Singlemode ports (30km, 1550nm, SC connector): 1
Serial Ports
Connector: DB9 x1
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Fiber port indicator: Green for port Link/Act at 100Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 3-pin terminal block
Power consumption (typical): 4W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 72mm x 100mm x 31mm
Weight: 325g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 1x RS232/422/485 + 1x 100 MM SC (LAN) (ORing IDS-5011FX-MM)

Physical Ports
100Base-FX Multimode ports (2km, 1310nm, SC connector): 1
Serial Ports
Connector: DB9 x1
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Fiber port indicator: Green for port Link/Act at 100Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 3-pin terminal block
Power consumption (typical): 4W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 72mm x 100mm x 31mm
Weight: 325g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 4x RS232/422/485 + 2x 10/100 RJ-45 (LAN + PoE PD) (ORing IDS-5042+)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
PoE PD port: Present at ETH2, Fully compliant with IEEE 802.3af Power Device specification, Over load & short circuit protection, Isolation Voltage 1000 VDC min., Isolation Resistance 100MΩ min.
Serial Ports
Connector: DB9 x4
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2)(PoE) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 682g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 4x RS422/485 (2kV isolated) + 2x 10/100 RJ-45 (LAN + PoE PD) (ORing IDS-5042-I+)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
PoE PD port: Present at ETH2, Fully compliant with IEEE 802.3af Power Device specification, Over load & short circuit protection, Isolation Voltage 1000 VDC min., Isolation Resistance 100MΩ min.
Serial Ports
Connector: 5 pin terminal block x 4 (2kV isolated)
Operation Mode: RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2)(PoE) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 667g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�60�C (14�140�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

FLUKE 62 - Pirometer

Measurement range: -32 �C � 600 �C ± 0,5%
Resolution: 0,1 �C
Field of view: 30�1
Typical distance to target: up to 5m
Emissirity: regulated from 0,1 to 1,0 with 0,01 step
Back light: yes
Other: �C/�F display selection, holder included
Power: 1x battery 9V 6F22
Memory: 12 measuring points
Guarante: 12 months
Manufacturer: Fluke

VoIP ATA gateway 2xFXS, router (IPG-802)

Protocols: SIP v1/v2
Ports: 1x 10/100 Mbps RJ-45 (LAN), 1x 10/100 Mbps RJ-45 (WAN), 2x FXS
Voice codec: G.711a, G.711u, G.723, G.726, G.729a, G.729b
VoIP lines: 3
Operating modes: SIP Proxy Client
Call features: CLIP, call forward, phone book, speed dial, Dial Plan
Voice quality: VAD, CNG, Packet Loss Compensation, dynamic Jitter Buffer
QoS support: ToS
Inbuild router: with NAT
STUN support: yes
VLAN support: yes
Asterisk support: yes
IP addressing: static IP, DHCP
Auto-provisioning: TFTP/FTP/HTTP
Management: WWW, telnet, phone
Power: 12 V DC 1A, ~230V AC
Weight: 0,28 kg
Warranty: 12 months

VoIP ATA gateway 1xFXS, router (IPG-801)

Protocols: SIP v1/v2
Ports: 1x 10/100 Mbps RJ-45 (LAN), 1x 10/100 Mbps RJ-45 (WAN), 1x FXS
Voice codec: G.711a, G.711u, G.723, G.726, G.729a, G.729b
VoIP lines: 3
Operating modes: SIP Proxy Client
Call features: CLIP, call forward, phone book, speed dial, Dial Plan
Voice quality: VAD, CNG, Packet Loss Compensation, dynamic Jitter Buffer
QoS support: ToS
Inbuild router: with NAT
STUN support: yes
VLAN support: yes
Asterisk support: yes
IP addressing: static IP, DHCP
Auto-provisioning: TFTP/FTP/HTTP
Management: WWW, telnet, phone
Power: 12 V DC 1A, ~230V AC
Weight: 0,28 kg
Warranty: 12 months

VoIP ATA gateway 1xFXS + 1xPSTN, router (IPG-801P)

Protocols: SIP v1/v2
Ports: 1x 10/100 Mbps RJ-45 (LAN), 1x 10/100 Mbps RJ-45 (WAN), 1x FXS, 1x PSTN
Voice codec: G.711a, G.711u, G.723, G.726, G.729a, G.729b
VoIP lines: 3
Operating modes: SIP Proxy Client
Call features: CLIP, call forward, phone book, speed dial, Dial Plan
Voice quality: VAD, CNG, Packet Loss Compensation, dynamic Jitter Buffer
QoS support: ToS
Inbuild router: with NAT
STUN support: yes
VLAN support: yes
Asterisk support: yes
IP addressing: static IP, DHCP
Auto-provisioning: TFTP/FTP/HTTP
Management: WWW, telnet, phone
Power: 12 V DC 1A, ~230V AC
Weight: 0,28 kg
Warranty: 12 months

VoIP ATA gateway 1xFXS + 1xFXO, router (IPG-811)

Protocols: SIP v1/v2
Ports: 1x 10/100 Mbps RJ-45 (LAN), 1x 10/100 Mbps RJ-45 (WAN), 1x FXS, 1x FXO
Voice codec: G.711a, G.711u, G.723, G.726, G.729a, G.729b
VoIP lines: 3
Operating modes: SIP Proxy Client
Call features: CLIP, call forward, phone book, speed dial, Dial Plan
Voice quality: VAD, CNG, Packet Loss Compensation, dynamic Jitter Buffer
QoS support: ToS
Inbuild router: with NAT
STUN support: yes
VLAN support: yes
Asterisk support: yes
IP addressing: static IP, DHCP
Auto-provisioning: TFTP/FTP/HTTP
Management: WWW, telnet, phone
Power: 12 V DC 1A, ~230V AC
Weight: 0,28 kg
Warranty: 12 months

Module, GBIC 1x 1000 Mbps SC SM, 80 km, CWDM

Port: 1x 1000 Mbps SC SM
TX wavelength: 1470 nm � 1610 nm, ITU grid
RX wavelength: 1470 nm � 1610 nm, ITU grid
Max. distance: 80 km
Cable type: 8.3/125 μm, 8.7/125 μm, 9/125 μm, 10/125 μm
Wave Division Multiplexing (WDM): CWDM
Module type: GBIC
Warranty period: 1 year

Fluke 61 - Pirometer

Measurement range: -18 �C � 275 �C ± 2%
Resolution: 0,2 �C
Field of view: 8�1
Typical distance to target: up to 1m
Emissirity: 0.95
Back light: yes
Other: �C/�F display selection
Guarante: 12 months
Manufacturer: Fluke

Filtration panel, roof type

Dedicated for Tirax cabinets series.

Filtration panel, roof type

Dedicated for Optirack cabinets series.

Module, SFP 1x 1000 Mbps LC SM, 32dB (120km), CWDM

Port: 1x 1000 Mbps LC SM
TX wavelength: 1590 nm
RX wavelength: 1590 nm
Max. distance: 32dB (120km)
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Coarse Wave Division Multiplexing (CWDM): yes
Module type: SFP
Warranty period: 1 year

Module, GBIC 1x 1000 Mbps SC SM, 40 km

Port: 1x 1000 Mbps SC SM
TX wavelength: 1310 nm
RX wavelength: 1310 nm
Max. distance: 40 km
Cable type: 8.3/125, 8.7/125, 9/125, 10/125 µm
Module type: GBIC
Warranty period: 1 year

Network camera, MPEG4, Full D1, PAL/NTSC (CAM-5200)

Sensor: SONY SuperHAD CCD, 1/3"
Video system: NTSC or PAL
Resolution: 720x480 – (D1 NTSC), 720x576 – (D1 PAL), 352x240 – (CIF NTSC), 352x288 – (CIF PAL), 160x112 – (QCIF NTSC), 176x144 – (QCIF PAL)
Hirizontal resolution: 480 TVL
Min. scene illumination: 0.15 Lux @ F1.2
Electronics shutter: 1/50s � 1/100000s (AES on), 1/50s (AES off)
S/N ratio: > 50 dB
Flickerless: yes
Automatic gain control: tak
White balance: automatic / manual
Lens: C / CS (with adaptor)
Iris control: Video / DC
Compression method: MPEG-4 ASP
Frame rate: 30 fps @ Full D1 NTSC, 25 fps @ Full D1 PAL
Supported protocols: TCP, UDP, HTTP, DHCP, PPPoE, DDNS, PPPoE
QoS: Layer 2 and 3
Network ports: 1x 10/100 Mbps RJ-45 (LAN), 1x 10/100 Mbps RJ-45 (WAN)
Video output: CVBS 1.0Vp-p, z��cze BNC 75 Ω
Alarm: 1x TTL Terminal Block (input), 1x TTL Terminal Block (output)
Required bandwidth: 28 kbps � 3 Mbps
Management: WWW (Internet Explorer 6.0 or above)
Operating temperatures: 5�C � 50�C
Power: 12V DC, ~230V AC
Dimensions: 63x52x120 mm
Weight: 0,45 kg

FLUKE TiR - Thermal Imager

TiR is optimized for building envelope, restoration and remediation, inspection and roofing applications.
Field of view (FOV): 23� horizontal, 17� vertical
Spatial resolution (IFOV): 2,5 mrad
Min focus distance: 0,15 m
Thermal sensitivity (NETD): <0,2�C
Focus: manual
Detector type: Focal Plane Array, Uncooled Microbolometer, 160x120
Temperature range: -20�C to 100�C ± 5% or 5�C (whichever is grater)
Emissivity: regulated on PC software
Display: 3 inch large color LCD, IR-Fusion (infrared and classic picture at once)
Palettes: 4
LCD backlight: yes
Memory: 2GB SD memory card
File formats supported: BMP or IR-Fusion IS2, export to JPEG/BMP/GIF/PNG/TIFF/WMF/EXIF/EMF
Software: SmartView - analysis and reporting software
Water and dust resistant: IP54
Dimensions: 262 x 101 x 162 mm
Weight: 1,85 kg

FLUKE Ti10 - Thermal Imager

Ti10 is the best price/performance breakthrough in thermal imaging. Easy-to-use and intuitive.

Included accessories - hand carrying case, battery pack, 2GB SD memory card, Memory card reader, soft-sided carrying case, AC/DC power adapter, SmartView software, user guide.
Field of view (FOV): 23� horizontal, 17� vertical
Spatial resolution (IFOV): 2,5 mrad
Min focus distance: 0,15 m
Thermal sensitivity (NETD): 0,2�C @ 30�C
Focus: manual
Detector type: Focal Plane Array, Uncooled Microbolometer, 160x120
Temperature range: -20�C to 250�C ± 5% or 5�C (whichever is grater)
Emissivity: regulated on PC software
Display: 3 inch large color LCD, IR-Fusion (infrared and classic picture at once)
Palettes: 4
LCD backlight: yes
Memory: 2GB SD memory card
File formats supported: BMP or IR-Fusion IS2, export to JPEG/BMP/GIF/PNG/TIFF/WMF/EXIF/EMF
Software: SmartView - analysis and reporting software
Water and dust resistant: IP54
Dimensions: 267 x 127 x 152mm
Weight: 1,2 kg

Wireless mini-PCI adapter (NMP8602)

Standard: IEEE 802.11a/b/g
Interface: mini-PCI typ III
Chipset: Atheros 5006X
Frequency range: 2400 MHz � 2484 MHz, 5150 MHz � 5850 MHz
Max. speed: 54 Mbps
Modulation: CCK, DQPSK, DBPSK (802.11b), 64 QAM, 16 QAM,QPSK, BPSK (802.11a/g)
Receiver sensitivity: -90 dBm @ 6Mbps (802.11a), -74 dBm @ 54 Mbps (802.11a), -92 dBm @ 6Mbps (802.11g), -76 dBm @ 54 Mbps (802.11g), -96 dBm @ 1 Mbps (802.11b), -92 dBm @ 11 Mbps (802.11b)
Max. output power: 20 dBm (802.11b), 20 dBm (802.11g), 19 dBm (802.11a)
Operational modes: infrastructure
Antenna: 2x UFL (I-PEX)
Supported protocols: TCP/IP, IPX, NDIS4, NDIS5, NDIS 5.1
Drivers: Windows 98SE/ME/2000/XP, Linux
Operating temperatures: 0�C � 55�C
Operating humidity: 10% � 85%, non-condensing
Dimensions: 60x45 mm
Weight: 0.02 kg

Unmanaged switch, 5x 10/100 RJ-45, O-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 5
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control
MAC Table: 2048 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Network Redundancy: Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
LED Indicators
Power / Ready indicator: Green : Ready LED
Ring Master indicator: Yellow : Indicates system operating in O-Ring Master mode
O-Ring indicator: Yellow : Indicates port operating in O-Ring mode
10/100TX RJ45 port indicator: Green for port Link/Act
Power
Input power: 9�30 VDC voltage power input
Power consumption (typical): 3W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 88mm x 102mm x 24mm
Weight: 308g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 4x 10/100 RJ-45 + 2x 100 SM SC, DIN 35 mm mounting, slim housing (ORing ...

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4
100Base-FX Singlemode ports (30km, 1550nm, SC connector): 2
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control
MAC Table: 1024 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power indicator: Green : Power LED x 2
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 7W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 33mm x 95mm x 144mm
Weight: 382g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 4x 10/100 RJ-45 + 2x 100 MM SC, DIN 35 mm mounting, slim housing (ORing ...

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4
100Base-FX Multimode ports (2km, 1310nm, SC connector): 2
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control
MAC Table: 1024 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power indicator: Green : Power LED x 2
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 7W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 33mm x 95mm x 144mm
Weight: 382g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 SM SC, DIN 35 mm mounting, slim housing (ORing ...

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4
100Base-FX Singlemode ports (30km, 1550nm, SC connector): 1
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control
MAC Table: 1024 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power indicator: Green : Power LED x 2
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 33mm x 95mm x 144mm
Weight: 378g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 MM SC, DIN 35 mm mounting, slim housing (ORing ...

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4
100Base-FX Multimode ports (2km, 1310nm, SC connector): 1
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control
MAC Table: 1024 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power indicator: Green : Power LED x 2
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 33mm x 95mm x 144mm
Weight: 378g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 8x 10/100 RJ-45, DIN 35 mm mounting, slim housing (ORing IES-1080A)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control
MAC Table: 1024 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power indicator: Green : Power LED x 2
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 4W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 33mm x 95mm x 144mm
Weight: 391g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 5x 10/100 RJ-45, DIN 35 mm mounting, slim housing (ORing IES-1050A)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 5
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control
MAC Table: 1024 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power indicator: Green : Power LED x 2
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block
Power consumption (typical): 3.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 33mm x 95mm x 144mm
Weight: 382g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Unmanaged switch, 8x 10/100 RJ-45 + 2x 1000 SFP, DIN 35 mm mounting (ORing IES-1082GP)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8
1000 Mbps SFP Ports: 2
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control
MAC Table: 8192 MAC addresses
Processing: Store-and-Forward
Software Features: Port configuration, Port status, Port statistics, Port monitoring, Port security
LED Indicators
Power indicator: Green : Power LED x 3
Fault indicator: Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 8W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 675g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Smart switch, 5x 10/100 RJ-45, O-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 5
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 2048 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching bandwidth: 1.0 Gbps
VLAN: Port Based
Security Features: Enable/disable ports, VLAN to segregate and secure network traffic
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, O-Ring
LED Indicators
Power / Ready indicator: Green : Ready LED
Ring Master indicator: Green : Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator: Green : Indicate system operated in O-Ring mode
10/100TX RJ45 port indicator: Green for port Link/Act
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: 9�30 VDC voltage power input
Power consumption (typical): 3W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 88mm x 102mm x 24mm
Weight: 308g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Managed switch, 8x 10/100 RJ-45 + 2x1000 SFP, O/Open-Ring

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8
1000 Mbps SFP Ports: 2
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 5.6 Gbps
Max. Number of Available VLANs: 256
Number of VLAN IDs: VID 1 to 4094
IGMP multicast groups: 256
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security
Network Redundancy: STP, RSTP, O-Ring, Open-Ring, O-RSTP
LED Indicators
Power / Ready indicator: Green : Ready LED x 3
Ring Master indicator: Green : Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator: Green : Indicate system operated in O-Ring mode
Fault indicator: Yellow : Indicate unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Yellow for Duplex/Collision
Fiber port indicator: Green for port Link/Act, Yellow for Link
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Input power: Triple DC inputs. 12�48VDC on 7-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 9W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 730g
Environmental
Storage Temperature: -40�85�C(-40�185�F)
Operating Temperature: -40�70�C (-40�158�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years

Device server, 1x RS232/422/485 + 1x 10/100 RJ-45 (LAN) + 1x 802.11b/g (WLAN) (ORing IDS-5011-WG)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 1
WLAN interface
Operating Mode: Client
Antenna Connector: Reverse SMA
Radio Frequency Type: DSSS
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
Modulation IEEE802.11g: OFDM with BPSK, OFDM with QPSK, OFDM with 16QAM, OFDM with 64QAM
Frequency Band: America/FCC 2.412~2.462 GHz (11 channels), Europe CE/ETSI 2.412~2.472 Ghz (13 channels)
Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps, IEEE802.11g 6/9/12/18/24/36/48/54 Mbps
Transmit Power: IEEE802.11b/g 16dBm
Receiver Sensitivity: -81dBm @ 11Mbps PER< 8%, -64dBm @ 54Mbps PER< 10%
Encryption Security: WEP (64-bit/128-bit key supported), WPA, WPA2 802.11i (WEP and AES encryption), PSK (256-bit key pre-shared key supported), Radius supported, TKIP encryption
Serial Ports
Connector: DB9 x1
Operation Mode: RS232, RS422, RS485 4/2-wire, can be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-232: TxD,RxD,RTS,CTS,DTR,DSR,DCD,RI,GND
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
WLAN Link /ACT: Green - Link
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 3-pin terminal block
Power consumption (typical): 5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 72mm x 100mm x 31mm
Weight: 346g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�55�C (14�131�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 3 years

Device server, 4x RS422/485 (2kV isolated) + 2x 10/100 RJ-45 (LAN) + 1x 802. ...

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX: 2
WLAN interface
Operating Mode: Client
Antenna Connector: Reverse SMA
Radio Frequency Type: DSSS
Modulation IEEE802.11b: CCK, DQPSK, DBPSK
Modulation IEEE802.11g: OFDM with BPSK, OFDM with QPSK, OFDM with 16QAM, OFDM with 64QAM
Frequency Band: America/FCC 2.412~2.462 GHz (11 channels), Europe CE/ETSI 2.412~2.472 Ghz (13 channels)
Transmission Rate: IEEE802.11b 1/2/5.5/11 Mbps, IEEE802.11g 6/9/12/18/24/36/48/54 Mbps
Transmit Power: IEEE802.11b/g 18dBm
Receiver Sensitivity: -81dBm @ 11Mbps PER< 8%, -64dBm @ 54Mbps PER< 10%
Encryption Security: WEP (64-bit/128-bit key supported), WPA, WPA2 802.11i (WEP and AES encryption), PSK (256-bit key pre-shared key supported), Radius supported, TKIP encryption
Serial Ports
Connector: 5 pin terminal block x 4 (2kV isolated)
Operation Mode: RS422, RS485 4/2-wire which, be configured by DS-Tool
Serial Baud Rate: 110 bps to 460.8 Kbps
Data Bits: 5, 6, 7, 8
Parity: odd, even, none, mark, space
Stop Bits: 1, 1.5, 2
RS-422: Tx+,Tx-,Rx+,Rx-,GND
RS-485 (4-wire): Tx+,Tx-,Rx+,Rx-,GND
RS-485 (2-wire): Data+,Data-,GND
Flow Control: XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power indicator PWR 1(2) / Ready: Red On - Power is on and booting up, Red Blinking - Indicates an IP conflict or DHCP or BOOTP server did not respond properly, Green On - Power is on and functioning Normally, Green Blinking - Located by Administrator
10/100TX RJ45 port indicator: Green for port Link/Act at 100Mbps, Yellow for port Link/Act at 10Mbps
WLAN Link /ACT: Green - Link
WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
Serial TX / RX LEDs: Red - Serial port is receiving data, Green - Serial port is transmitting data
Power
Input power: Dual DC inputs. 12�48VDC on 6-pin terminal block, 12�45VDC on power jack
Power consumption (typical): 6.5W
Overload current protection: present
Reverse polarity protection: present on terminal block
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 52mm x 106mm x 144mm
Weight: 675g
Environmental
Storage Temperature: -40�85�C (-40�185�F)
Operating Temperature: -10�55�C (14�131�F)
Operating Humidity: 5%�95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 3 years